Search

Search for projects by name

Sanko logoSanko

Badges

About

Sanko is an NFT and gaming-focused Orbit stack L3 on Arbitrum with AnyTrust DA and DMT as its native token, created by Sanko GameCorp.


Value Locked
$30.98 M17.5%
Canonically Bridged
$26.35 M
Externally Bridged
$0.00
Natively Minted
$4.63 M

  • Tokens
  • Daily UOPS
    0.0917.3%
  • 30D tx count
    301.45 K

  • Type
    Optimium
  • Purposes
    Universal, Gaming, Social
  • Host chain
    Arbitrum One
  • Sequencer failureState validationData availabilityExit windowProposer failure

    Badges

    About

    Sanko is an NFT and gaming-focused Orbit stack L3 on Arbitrum with AnyTrust DA and DMT as its native token, created by Sanko GameCorp.


    Value Locked
    Activity
    Risk summary
    There are 5 additional risks coming from the hostchain Arbitrum One logoArbitrum One
    Fraud proof system is fully deployed but is not yet permissionless as it requires Validators to be whitelisted.
    Risk analysis
    The L3 risks depend on the individual properties of L3 and those of the host chain combined.
    Fraud proof system is fully deployed but is not yet permissionless as it requires Validators to be whitelisted.
    SEQUENCER
    FAILURE
    STATE
    VALIDATION
    DATA
    AVAILABILITY
    EXIT WINDOWPROPOSER
    FAILURE
    Arbitrum One
    L2
    Self sequenceFraud proofs (INT)Onchain7dSelf propose
    Sanko
    L3 • Individual
    Self sequenceFraud proofs (INT)External (DAC)NoneSelf propose
    Sanko
    L3 • Combined
    Self sequenceFraud proofs (INT)External (DAC)NoneSelf propose
    L2 & L3 individual risks
    Sequencer failureState validationData availabilityExit windowProposer failure
    L3 combined risks
    Sequencer failureState validationData availabilityExit windowProposer failure

    L3 combined risks
    The information below reflects combined L2 & L3 risks.

    Sequencer failure

    Self sequence

    In the event of a sequencer failure, users can force transactions to be included in the project’s chain by sending them to L1. There is a 2d delay on this operation.

    State validation

    Fraud proofs (INT)

    Fraud proofs only allow 3 WHITELISTED actors watching the chain to prove that the state is incorrect. Interactive proofs (INT) require multiple transactions over time to resolve. The challenge protocol can be subject to delay attacks. There is a 6d 8h challenge period.

    Data availability

    External (DAC)

    Proof construction relies fully on data that is NOT published onchain. There exists a Data Availability Committee (DAC) with a threshold of 2/3 that is tasked with protecting and supplying the data.

    Exit window

    None

    There is no window for users to exit in case of an unwanted regular upgrade since contracts are instantly upgradable.

    Proposer failure

    Self propose

    Anyone can become a Proposer after 25d 10h of inactivity from the currently whitelisted Proposers.

    Technology
    The section considers only the L3 properties. For more details please refer to Arbitrum One logoArbitrum One

    Data is not stored on chain

    Users transactions are not published on-chain, but rather sent to external trusted parties, also known as committee members (DAC). Members of the DAC collectively produce a Data Availability Certificate (comprising BLS signatures from a quorum) guaranteeing that the data behind the new transaction batch will be available until the expiry period elapses (currently a minimum of two weeks). This signature is not verified by L1, however external Validators will skip the batch if BLS signature is not valid resulting. This will result in a fraud proof challenge if this batch is included in a consecutive state update. It is assumed that at least one honest DAC member that signed the batch will reveal tx data to the Validators if Sequencer decides to act maliciously and withhold the data. If the Sequencer cannot gather enough signatures from the DAC, it will “fall back to rollup” mode and by posting the full data directly to the L1 chain. The current DAC threshold is 2 out of 3.

    • Funds can be lost if the external data becomes unavailable (CRITICAL).

    • Users can be censored if the committee restricts their access to the external data.

    1. Inside AnyTrust - Arbitrum documentation
    Learn more about the DA layer here: Sanko DAC logoSanko DAC
    State validation

    Updates to the system state can be proposed and challenged by a set of whitelisted validators. If a state root passes the challenge period, it is optimistically considered correct and made actionable for withdrawals.


    State root proposals

    Whitelisted validators propose state roots as children of a previous state root. A state root can have multiple conflicting children. This structure forms a graph, and therefore, in the contracts, state roots are referred to as nodes. Each proposal requires a stake, currently set to 0.1 ETH, that can be slashed if the proposal is proven incorrect via a fraud proof. Stakes can be moved from one node to one of its children, either by calling stakeOnExistingNode or stakeOnNewNode. New nodes cannot be created faster than the minimum assertion period by the same validator, currently set to 15m. The oldest unconfirmed node can be confirmed if the challenge period has passed and there are no siblings, and rejected if the parent is not a confirmed node or if the challenge period has passed and no one is staked on it.

    • Funds can be stolen if none of the whitelisted verifiers checks the published state. Fraud proofs assume at least one honest and able validator (CRITICAL).

    1. How is fraud proven - Arbitrum documentation FAQ
    Challenges

    A challenge can be started between two siblings, i.e. two different state roots that share the same parent, by calling the startChallenge function. Validators cannot be in more than one challenge at the same time, meaning that the protocol operates with partial concurrency. Since each challenge lasts 6d 8h, this implies that the protocol can be subject to delay attacks, where a malicious actor can delay withdrawals as long as they are willing to pay the cost of losing their stakes. If the protocol is delayed attacked, the new stake requirement increases exponentially for each challenge period of delay. Challenges are played via a bisection game, where asserter and challenger play together to find the first instruction of disagreement. Such instruction is then executed onchain in the WASM OneStepProver contract to determine the winner, who then gets half of the stake of the loser. As said before, a state root is rejected only when no one left is staked on it. The protocol does not enforces valid bisections, meaning that actors can propose correct initial claim and then provide incorrect midpoints.

    1. Fraud Proof Wars: Arbitrum Classic
    Operator
    The section considers only the L3 properties. For more details please refer to Arbitrum One logoArbitrum One

    The system has a centralized sequencer

    While forcing transaction is open to anyone the system employs a privileged sequencer that has priority for submitting transaction batches and ordering transactions.

    • MEV can be extracted if the operator exploits their centralized position and frontruns user transactions.

    1. Sequencer - Arbitrum documentation

    Users can force any transaction

    Because the state of the system is based on transactions submitted on the underlying host chain and anyone can submit their transactions there it allows the users to circumvent censorship by interacting with the smart contract on the host chain directly. After a delay of 1d in which a Sequencer has failed to include a transaction that was directly posted to the smart contract, it can be forcefully included by anyone on the host chain, which finalizes its ordering.

    1. SequencerInbox.sol - Etherscan source code, forceInclusion function
    2. Sequencer Isn’t Doing Its Job - Arbitrum documentation
    Withdrawals
    The section considers only the L3 properties. For more details please refer to Arbitrum One logoArbitrum One

    Regular exit

    The user initiates the withdrawal by submitting a regular transaction on this chain. When the block containing that transaction is finalized the funds become available for withdrawal on L1. The process of block finalization usually takes several days to complete. Finally the user submits an L1 transaction to claim the funds. This transaction requires a merkle proof.

    1. Transaction lifecycle - Arbitrum documentation
    2. L2 to L1 Messages - Arbitrum documentation
    3. Mainnet for everyone - Arbitrum Blog

    Tradeable Bridge Exit

    When a user initiates a regular withdrawal a third party verifying the chain can offer to buy this withdrawal by paying the user on L1. The user will get the funds immediately, however the third party has to wait for the block to be finalized. This is implemented as a first party functionality inside Arbitrum’s token bridge.

    1. Tradeable Bridge Exits - Arbitrum documentation

    Autonomous exit

    Users can (eventually) exit the system by pushing the transaction on L1 and providing the corresponding state root. The only way to prevent such withdrawal is via an upgrade.

    Other considerations

    EVM compatible smart contracts are supported

    Arbitrum One uses Nitro technology that allows running fraud proofs by executing EVM code on top of WASM.

    • Funds can be lost if there are mistakes in the highly complex Nitro and WASM one-step prover implementation.

    1. Inside Arbitrum Nitro
    Permissions

    The system uses the following set of permissioned addresses:

    Sequencers 0x2f4d…017a

    Central actors allowed to submit transaction batches to L1.

    They can submit new state roots and challenge state roots. Some of the operators perform their duties through special purpose smart contracts.

    Sanko Multisig 0x420B…61BB

    This is a Gnosis Safe with 4 / 5 threshold. Rollup Owner: Can execute upgrades for the entire rollup system via the UpgradeExecutor.

    Those are the participants of the Sanko Multisig.

    SankoOftMultisig 0x2227…7185

    This is a Gnosis Safe with 2 / 4 threshold. Can change security parameters of the DMT token (Sanko gas token) and its OFT (LayerZero) adapters. This includes the permission to mint unlimited tokens or steal tokens in the canonical bridge escrow.

    Those are the participants of the SankoOftMultisig.

    Smart contracts
    A diagram of the smart contract architecture
    A diagram of the smart contract architecture

    The system consists of the following smart contracts on the host chain (Arbitrum One):

    OrbitProxyOFT1_2 0xa9Aa…9C29

    OFT Adapter contract using the LayerZero v1 AMB for messaging. This contract can mint tokens on Sanko and steal tokens in the canonical bridge escrow. Its security depends on LayerZero v1 security.

    Main contract implementing Arbitrum One Rollup. Manages other Rollup components, list of Stakers and Validators. Entry point for Validators creating new Rollup Nodes (state commits) and Challengers submitting fraud proofs.

    Contract managing Inboxes and Outboxes. It escrows the native token used for gas on the chain. This contract stores the following tokens: DMT.

    Implementation used in:

    Main entry point for the Sequencer submitting transaction batches.

    Entry point for users depositing ETH and sending L1 -> L2 messages.

    Implementation used in:

    Contract that allows L2->L1 calls, i.e. messages initiated on L2 which eventually resolve in execution on L1.

    Implementation used in:

    Contract allowed to upgrade the system.

    Implementation used in:

    Contract that allows challenging invalid state roots. Can be called through the RollupProxy.

    OneStepProofEntry 0x5D1E…6368

    Contract used to perform the last step of a fraud proof.

    OneStepProverMemory 0x2D81…f454

    Contract used to perform the last step of a fraud proof.

    OneStepProverMath 0x29E1…59cB

    Contract used to perform the last step of a fraud proof.

    OneStepProverHostIo 0xE139…fE15

    Contract used to perform the last step of a fraud proof.

    OneStepProver0 0x5C86…ddEe

    Contract used to perform the last step of a fraud proof.

    Value Locked is calculated based on these smart contracts and tokens:

    Main entry point for users depositing ERC20 tokens. Upon depositing, on L2 a generic, “wrapped” token will be minted.

    Contract managing Inboxes and Outboxes. It escrows DMT sent to L2.

    Can be upgraded by:

    Upgrade delay: No delay

    Implementation used in:

    The current deployment carries some associated risks:

    • Funds can be stolen if the security stack of the whitelisted LayerZero adapter changes or is compromised (CRITICAL).